Pneuline Supply, Inc. - CRV Series Cartridge Insert Valves

These Cartridge Insert Valves can be installed into tubing lines or glued into manifolds. The optional housing materials are Nylon, Polypropylene, Acrylic, Acetal, PVDF, and Polycarbonate. Springs are 316 Stainless Steel or Hastelloy® (1/2 psi). O-Rings are of Buna-N, EPDM, FKM, Silicone and Kalrez. Available sizes are 1/4″, 5/16", 3/8", 1/2″, 5/8" and 3/4" OD. Standard crack pressure for all valves except 3/4″ OD is 3" H₂O 0.1 psi, 5 psi, or 1.5 psi.

Unit of Measure

Items	CRV-12-11-PPB CRV Series 1/2 Inch (in) Size and 11 Pounds per Square Inch (psi) Insert Valve	CRV-14-10PPE CRV Series 1/4 Inch (in) Size and 10 Pounds per Square Inch (psi) Insert Valve	CRV-14-3-PPE CRV Series 1/4 Inch (in) Size and 3 Pounds per Square Inch (psi) Insert Valve	CRV-14-PB-.5 CRV Series 1/4 Inch (in) Size and 0.5 Pounds per Square Inch (psi) Insert Valve	CRV-14-PB-1 CRV Series 1/4 Inch (in) Size and 1 Pounds per Square Inch (psi) Insert Valve
Description	N/A These Cartridge Insert Valves can be installed into tubing lines or glued into manifolds. The optional housing materials are Nylon, Polypropylene, Acrylic, Acetal, PVDF, and Polycarbonate. Springs are 316 Stainless Steel or Hastelloy® (1/2 psi). O-Rings are of Buna-N, EPDM, FKM, Silicone and Kalrez. Available sizes are 1/4", 5/16", 3/8", 1/2", 5/8" and 3/4" OD. Standard crack pressure for all valves except 3/4" OD is 3" H₂O 0.1 psi, 5 psi, or 1.5 psi.
Series	N/A CRV
Size	N/A 1/2 in	N/A 1/4 in	N/A 1/4 in	N/A 1/4 in	N/A 1/4 in
Pressure Rating	N/A 11 psi	N/A 10 psi	N/A 3 psi	N/A 0.5 psi	N/A 1 psi
Material	N/A Polypropylene
Seal Material	N/A Buna	N/A Ethylene Propylene Diene Monomer (EPDM)	N/A Ethylene Propylene Diene Monomer (EPDM)	N/A Buna	N/A Buna
Note	N/A If you do not see exactly what you are looking for, please contact our sales department.